Canopy Network Updater Steps

1. Launch Canopy Network Updater
2. Select update , manage packages , make sure the 21.0 STA is selceted.
3. Right click NETWORK ROOT , click ADD NETWORK ELEMENT from the drop down.
4. Uncheck USE Default Settings
5. Fill in the DEVICE login ID with admin , Device Password plut0 , type the password again.
6. Leave the HTTP settings as is.
7. Make sure the Element Host NAME(S)/IP Address(s) is checked.
8. In the box at the bottom , type in the devices management IP.
9. Make sure the SNMP information for READ/WRITE is backinblack80 As well with the community in the Canopy software updater.
10. SNMP version should be v2c, SNMP port can stay 161. Click ok.
11. Go to UPDATE again and click update entire network route.